- Build an inspection port for the underside of the right wing
- Reconnect the "lost" wiring conduit in the right wing
- Build in tie-down points
- Probably OK at the wingtips.
- Could be a custom steel piece that doubles as a mount for the wingtip lights
- Build sighting device
- Must not interfere with the wingtip light
- Verify the presence of fiberglass pads under each aileron hinge bracket
- Install one non-spherical bearing in each inboard aileron hinge bracket
- Anti-chafe tape for the wing root fairings
- Install pitot tube
- Consider implementing the aileron stop mod described at https://www.gilesaerobatics.org/aileron-stop-mod
Perfection is achieved not when there is nothing left to add, but when there's nothing left to take away. -- St. Exupery